MADRIX® NEBULA

The MADRIX NEBULA directly connects to your LED pixels. This advanced SPI decoder receives control data over Ethernet network or USB and is built to provide excellent image quality.

SPI converter & direct connection — connect directly to a wide range of supported LEDs via two 4-pin screw terminals, with signal frequency up to 24 MHz. Power over USB or 5–24 V via a 2-pin screw terminal.

Quality output of 8 universes — each device drives up to 1,360 RGB pixels with responsive delivery of high-quality signals; choose the output protocol separately for each of the two ports.

Art-Net / Streaming ACN / USB — network data is directly converted to SPI without an additional interface, from any compatible software or hardware controller, or over USB to MADRIX 5.

Sync mode & daisy-chain support — MADRIX 5 and MADRIX hardware fully synchronise Art-Net data across ports and devices; two Ethernet ports allow linear daisy-chaining.

Designed for DIN rails or walls — non-conductive enclosure for 35 mm top-hat rails, with two extra brackets for wall mounting and 9 status indicators (which can be turned off).

Invaluable features — ready within seconds of startup, automatic HTP merging for two Ethernet sources, upgradable firmware, built-in web configuration page.

Supported LEDs — APA101/102/104/106, GS8206/8207/8208, GW6201/6205, LPD1882S/6803/8806, MBI6024/6120, MY9291, P9883, SJ1221, SK6112/6805/6812/6813/6822, SK9816/9822/9826, SM16703/16716, TLC5973, TLS3001/3008, TM1804/1809/1812/1814/1829, UCS1903/2903/2904/512B3/8904/9812S, WS2801/2803/2811/2811S/2812/2812B/2813/2815/2818/2822S (as of July 2021 — additional types added via firmware updates).